FashionAndFlick

FashionAndFlick

The Daily Pao Reading FashionAndFlick 3 minutes Next iDiva

Vetro Power – The Clean RevolutionVetro Power - FashionAndFlick.com Review

India, June, 2016: For the first time in Asia, Trifli Technologies Pvt. Ltd launches Vetro Power, it marks the onset of ‘The Clean Revolution’ for footwear. Being the first of its kind, Vetro Power is an extremely advanced nanotechnology enabled spray that provides the strongest protective coating for your footwear, banishing all your shoe woes.

The weekend is over and you are back to work!  Few drinks down, a happier you and stained shoes, the juggernaut of our lives! Have you ever imagined your white shoes still be as white when you first set eyes on them, your suede shoes still look spotless after the inundating weekends, holidays, daily hustle bustle of lives? Vetro Power is the answer to a closet full of spick and span shoes.

Vetro Power is a spray that creates an invisible, hydrophobic (water repellant) and self-cleaning silicon dioxide coating, which makes surfaces practically water-proof and stain-proof. Any accidental spills of liquid (water, alcohol, oil, mud etc.) falling onto the coated shoe will form into beads and roll off the surface, taking any dirt and foreign matter along with it. Your footwear is now water and dirt proof as no foreign matter can penetrate and settle on the coated surface. All it takes is a one-time simple application and you are set for a minimum of 12-18 months.

While the product composition is complex, the application is simple:

  1. Ensure the footwear’s surface is clean and dirt free. We recommended using Vetro Power on newly purchased footwear for best results. For newly purchased footwear, rub with a damp cloth to remove any temporary coating
  2. Shake well and, from a distance of 10-15cm spray several coats, evenly covering the entire surface till damp. Use a soft brush to gently rub the coating into delicate surfaces
  3. To ensure an effective and durable coating, repeat entire process again after 10 minutes
  4. Keep in a cool, dry environment away from sunlight for 24 hours for coating to completely harden and cure
  5. Works best on new footwear, due to absence of bacteria and lack of damage compared to, when applied on used footwear
  6. To maintain its effectiveness repeat every 12 months – we guarantee that a Vetro Powered pair of shoes will last longer than an uncoated equivalent

Additionally, Vetro Power is odourless, non-toxic and environmentally friendly and resistant to heat and moisture. The coating is 500 times thinner than human hair making it impossible to be visible to the naked eye. It can be used on an array of materials- leather, suede, nubuck, fabric, nylon, synthetic, canvas and sheepskin, without altering the material of the shoes. Usually, 25ml of the product is sufficient enough for a pair of shoes to last for life (12-18months).

Priced at 1500 INR for a 100ml bottle, circumvent all those stains, spots and step forth in your cleanest shoe!

Continue reading

Leave a comment

All comments are moderated before being published.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.