Clear
80% daylight
Vetro Power
Clear 80
Price on site survey
- Keeps 80% of daylight, near invisible on the glass. Rejects 75% of infrared heat, cuts glare by 12%. For rooms you want bright.
Cart
Your cart is empty
West-facing bedroom too hot by 4 pm? Glare on the TV? A clear nanoceramic film on the inside of your glass stops up to 95% of the sun’s infrared heat and over 99% of UV, and keeps the view. Measured, cut and installed at your home in one visit.

One visit
Done at your home
Up to 95% IR heat rejection
Glass lets the sun’s infrared heat and UV straight into the room. The AC works harder, the sofa and floor fade, and the glare makes the room unusable in the afternoon. Curtains block the view.


A sun control film works on the glass itself: rooms facing direct sun run 3 to 6 degrees cooler, and rooms in partial sun 5 to 7 degrees cooler.
50 to 80%
How much daylight still comes through. 80 is near clear; 50 is a light tint.
75 to 95%
The part of sunlight you feel as heat on your skin. Higher is cooler.
Over 99%
The rays that fade fabric, wood and flooring. Same on all three films.
36 to 51%
All of the sun’s energy the film keeps out: light, infrared heat and UV together.
Figures from the manufacturer’s data sheet for the Vetro Power Ultra Cool nanoceramic film range. Infrared measured at 900 to 1000 nm. Results vary with glass type and orientation.
Straight answers
Windows, sliding and balcony doors, skylights, office partitions, shop fronts and glass facades. Before we start we check glass type, thickness, laminated or toughened, existing coatings and which way it faces.
Not sure about your glass? Send a photoOne easy visit
One visit, and the glass is ready to use the same day.

We measure every pane and take a reading on your glass so you see the difference later.

Both sides cleaned and scraped so nothing sits under the film.

Film cut to each pane on site, edges trimmed to the frame.

Applied wet on the inside face, squeegeed flat, edges sealed.

Second meter reading, care guide and your warranty card.
All three are nanoceramic films. The difference is how much daylight you keep and how much heat you reject. Priced per square foot, film and installation included.
80% daylight
Vetro Power
Clear 80
Price on site survey
70% daylight
Vetro Power
Balanced 70
Price on site survey
50% daylight
Vetro Power Cool 50
Price on site survey
Our own team, or partners we have trained ourselves. Either way, the work and the warranty are the same.
Clear 80 keeps the most daylight and suits rooms you want bright. Balanced 70 adds a light neutral tint. Cool 50 is for west-facing glass that bakes. At the free site survey we check which way your glass faces and help you choose.
Price depends on the glass area and the film. Share your name and number and we will call you with the exact price after a free site survey.
Free site survey
Our film experts call within 1 hour during working hours (Mon to Sat, 10am to 7pm)
Based in Mumbai, our team visits homes across India, Monday to Sunday. Send us your city on WhatsApp to book a visit.
Rooms facing direct sun run 3 to 6 degrees cooler. The room still warms from walls and roof.
12 to 42% less glare depending on the film, without closing the curtains.
Over 99% of UV is blocked. Heat and light also fade fabric, so the film slows fading, not stops it.
A thin film does nothing for sound.
Yes. Film it before the first summer and the furniture never sees the UV.
Go for itWe remove it, clean the adhesive off and refilm. Removal is quoted separately.
Remove and redoNo. These are clear and lightly tinted films, not mirror films. Clear 80 keeps 80% of daylight and Cool 50 keeps 50%, and reflection at night is low, so the view stays clear.
We fit three clear nanoceramic films on home windows. Clear 80 keeps 80% of daylight and suits rooms you want bright. Balanced 70 keeps 70% with a light neutral tint. Cool 50 keeps 50% and rejects the most infrared heat, for west-facing glass. All three block over 99% of UV, and indoor reflection stays low at night, so the view stays clear.
Not the dark or mirror kind. These are clear and lightly tinted nanoceramic films that keep 50 to 80% of daylight. The room does not turn dark, and indoor reflection stays low at night.
It depends on the glass area and the film you choose. The price per square foot includes the film and installation. Book a free site survey and we’ll give you the exact price.
Usually, yes: windows, sliding and balcony doors, skylights, partitions and more. Before we start we check the glass type, thickness, whether it is laminated or toughened, existing coatings and which way it faces. Cracked, already filmed or some laminated glass needs a check first.
We apply it wet on the inside face, squeegee it flat and seal the edges. You get a care guide and your warranty card at the end of the visit.
Yes. On the film data sheet the three films reject 75 to 95% of infrared heat (measured at 900 to 1000 nm) and 36 to 51% of total solar energy. The data sheet gives rooms facing direct sun as 3 to 6 degrees cooler and rooms in partial sun as 5 to 7 degrees cooler. Results vary with glass type and which way the window faces.
Both are on the film data sheet. Infrared rejection is the share of the sun’s infrared heat the film blocks, measured at 900 to 1000 nm. Total solar energy rejected counts all of the sun’s energy: light, infrared and UV together. When the aim is to keep a room cooler, the data sheet advises going by infrared rejection.
Clear 80: 75% infrared, 36% total. Balanced 70: 90% infrared, 48% total. Cool 50: 95% infrared, 51% total.
We visit homes across India. Send us your city on WhatsApp or request a call back, and we'll book your site survey.
Still have a question?
Ask us on WhatsApp. We reply fast.
One home visit, a few hours, and up to 95% of the sun’s infrared heat stays outside.